Archive

Archive for the ‘Indian embedded industry’ Category

Renesas Mobile inaugurates R&D centre in Bangalore

Renesas Mobile Corp., a wholly-owned subsidiary of Renesas Electronics Corp., announced the inauguration of its research and development (R&D) centre in Bangalore, India which develops 2G, 3G and 4G modem technologies.

(L-R): Heikki Tenhunen, senior VP, Alan Frederiksen, MD, Renesas Mobile India,  Shinichi Yoshioka, senior executive VP and COO, and Jean-Marie Rolland, CTO and executive VP, Sales and Marketing.

(L-R): Heikki Tenhunen, senior VP, Alan Frederiksen, MD, Renesas Mobile India, Shinichi Yoshioka, senior executive VP and COO, and Jean-Marie Rolland, CTO and executive VP, Sales and Marketing.

Renesas Mobile was established on December 1, 2010 as a 100 percent subsidiary company of Renesas Electronics. As part of the Renesas group, it has the support of the world’s largest embedded microcontroller player in the semiconductor world. Renesas Mobile focuses on platforms for smart phones, feature phones, car infotainment and embedded connected devices enabling people to stay connected in the cloud computing era.

The company integrates the former Mobile Multimedia Business Unit of Renesas with the former Nokia Wireless Modem Business Unit. The Nokia Wireless Modem Business Unit has been acquired by Renesas Electronics as announced on July 1st, 2010.

Introducing Renesas Mobile Corp., Heikki Tenhunen, senior VP, said that Renesas Mobile offers advanced and innovative products and services for mobile phones, car infotainment solutions, consumer electronics and industrial applications.

The company’s mission is to develop, productize and deliver advanced triple- and dual-mode communication centric semicon chipsets and platforms based on chipsets to provide innovative solutions and drive mew oppurtunities for customers. Renesas Mobile aims to be a world leader in mobile platforms by evolving its proven modem, application processor and SoCs, and associated services via its global business channel.

The Renesas-Nokia combine has since gone on to make unrivalled connected experiences a reality — by way of powerful multi-tasking, rich multimedia, newly emerging technologies — such as cloud computing, 3D, augmented reality, etc., PC like Internet experience, smaller form factor and longer battery life, and remain always connected!

Renesas’ mobile expertise includes the following:
* Excellent device experience, supporting over 400 mobile handsets to date;
* Key components verified at ‘system‘ level quality for platform release;
* Complete reference design easy to start application development;
* Market proven multimedia software package and multiple OpenOS integration support;
* Competitive SoC implementation performance; over 470 mn transistors in mobile LSI (G4);
* Leading-edge process (45nm, 28nm, 22nm) balancing own fab and partners (TSMC, etc.). Read more…

Indian semicon market update shows 28.3 percent growth in 2010!

I am a bit amused to read the latest key findings on the Indian semiconductor market from ISA-Frost & Sullivan. Never mind!

Source: ISA-Frost

Source: ISA-Frost

The report concludes that products demonstrating potential for explosive growth include –mobile devices, telecom base stations, LCD TV, STB, EMS, CFL, LED lights and smart cards and products with low MI – notebooks, tablets, STBs routers, digital cameras, etc. need to be given preferential treatment for indigenous manufacturing.

India is becoming the hub for small car manufacturing. Incentives and encouragement need to be provided for enhancing automotive component manufacturing in the country to keep pace with automobile industry growth.

Products enabling energy efficiency need to be incentivized through tax breaks for R&D and product development thereby promoting indigenous manufacturing. Electronics and semiconductor MI stagnate at 50 percent;  the TAM growth is unlikely to match the TM growth in the near future! Continuing status quo — the electronics import bill to surpass crude import bill by 2020-21.

The need of the hour is a focused mission for local electronics manufacturing promotion. A National Electronics Development Plan is also required. As is required an electronics policy for ecosystem development; subsidies for manufacturing; funds for R&D; extended tax breaks; hardware development parks.

Otherwise, the report suggests that India’s semiconductor market grew by a phenomenal 28.3 percent in 2010.

Indian semiconductor market: Source: ISA-Frost

Indian semicon market: Source: ISA-Frost

The global semiconductor market’s cyclical trends has minimal impact on India. Mobile devices, telecom and IT/ OA contributed 82 percent to semiconductor TM in 2010.

Local manufacturing of telecom equipment by OEMs and EMS companies to propel related semiconductor consumption by a massive 50 percent during 2010 to 2012. Influenced by regulatory norms and sharpening competition, automotive segment to account for the highest growth in semiconductor demand at 31 percent from 2010 to 2012.

Sustained gulf between the semiconductor TM and TAM from 2010-2012 highlight the urgency to promote local manufacturing to drive higher growth in TAM.

The Total Semiconductor Market (TM) revenues are poised to grow from $6.55 billion in 2010to $9.86 billion in 2012. The market is expected to witness a CAGR of 22.7 percent.

During the corresponding period, the Total Semiconductor Available Market (TAM) revenues are expected to grow at a CAGR of 22.3 percent reaching revenues of $4.71 billion in 2012from $3.14 billion in 2010. Mobile devices and telecom are the key contributors to TAM while mobile devices and IT/ OA are the key contributors to TM.

Being an indispensable component in a wide range of products, the memory market leads the contribution to semiconductor revenues with 23.4 percent and 20.1 percent of TM and TAM, respectively.

One hopes that all of this is indeed correct, and the Indian semiconductor industry continues to grow in future!

'Long wait' for Indian semiconductor industry?

I still don’t quite understand the submission made by the IT Taskforce on recommendations for the Indian hardware and electronics manufacturing! The first proposal was submitted by this Taskforce, back in Nov. 2009! Now, a leading daily comes out with a report about a new prescription to boost electronics manufacturing. What is all this?

By itself, isn’t this a ‘long wait’ for the Indian semiconductor and electronics industries?

I repeat: Have we really done enough, even in  the past, to even boost electronics hardware manufacturing in the country? If yes, then where are the mini Hsinchus and Shenzhens within India? N. Vittal had said something similar (such as developing mini Hong Kongs and Singapores) some years ago, but that seems ages ago, now!

Back in April 2010, I had written a post titled: Did you know that the Indian semicon policy had expired and now requires an extension? The next thing one heard was in July 2010: Indian industry proposes to extend deadline of India’s semicon policy up to March 2015!

What is really happening with the Indian semiconductor industry? First up, the semiconductor indusrty is NOT the IT industry. However, it appears that it is being treated like one!

Did anyone really look into the reason why fabs never happened in round 1 of the SIPS? Perhaps, not! I had asked a question, back in Feb. 2009: The Indian silicon wafer fab story seems dead and buried. Should we revive it?

Lest I be repetitive, and boring, I had suggested a 10-point program for the Karnataka semicon policy — in another blog post — on June 29, 2008. The points were:

1. A long-term semiconductor policy running 20-25 years or so.
2. Core team of top Indian leaders from Indian firms and MNCs, as well as technology institutes in Karnataka to oversee policy implementation.
3. Incentives such as government support, including stake in investments, and tax holidays.
4. Strong infrastructure availability and management.
5. Focus on having solar/PV fabs in the state.
6. Consider having 150/180/200mm fabs that tackle local problems via indigenous applications.
7. Develop companies in the assembly testing, verification and packaging (ATMP) space.
8. Attract companies in fields such as RFID, to address local problems and develop local applications.
9. Pursue companies in PDP, OLED/LED space to set up manufacturing units.
10. Promote and set up more fabless units.

All that one needs to do is to simply extend this all across India, rather than waste time in devising policies that have either expired, or well, take ages to see the light of the day! We should also refrain from discussing wafer fabs for now, and focus on fabless. Although, if we do attract and develop a local fab, that would be great for India!

Wonder, whether anyone in India is even listening!

Study on semiconductor design, embedded software and services industry in India

The India Semiconductor Association (ISA) has released a study on semiconductor design, embedded software and services industry, along with Ernst & Young.

According to the report, the key challenges constraining the growth of the semiconductor design industry are summarized under five major issues:
i) Quality, availability and maturity of talent.
ii) Absence of a startup and SME ecosystem.
iii) Lack of a semiconductor ecosystem.
iv) Lack of adequate infrastructure, policies and implementable incentives.
v) External issues such as competition from Asian countries and protectionist policies by some countries.

The report then goes on to tackle each one of these issues in detail under elaborate recommendations.

These recommendations require the concerted and co-ordinated efforts by the government, industry and academia to aid India reach the next level of growth and achieve the specific goals envisaged for the industry. The goals are:

Goal 1:
Maintain leadership in semiconductor design by incubating 50 fabless semiconductor companies, each with the potential to grow to $200 million in annual revenues by 2020.

Goal 2: Build on India’s favorable intellectual property protection image and make it among the top 5 destinations for intellectual property creation in the semiconductor design industry.

Goal 3: Capitalize on indigenous demand in strategic sectors to provide impetus to the Indian fabless semiconductor industry.

Goal 4: Sustain and nurture high-class semiconductor design manpower at a growth rate of 20 percent year-on-year to double its current output levels to reach a workforce size of 400,000 in the next five years.

The very first goal itself is a bit far fetched, but not that it can’t be achieved. To reach anywhere close to this goal, a concerted all round effort would be required from all in the industry. The fourth goal would have been better as the first goal, but never mind.

The second goal looks fine, but it is the third goal that seems a bit far off. This is April 2011, and still, there are talks about capitalizing on the indigenous demand in strategic sectors in order to provide impetus to the Indian fabless semiconductor industry?

I recall a discussion in mid-2005 where an industry expert mentioned that fabless was the way forward for the Indian industry! Between then and now, fabs were supposed to come up, but they failed. Nevertheless, one must not give up hope! Read more…

SFO – India's leading ODM player!

Thanks to Soni Saran Singh, executive director, NMTronics India Pvt Ltd, I was able to attend a ‘Global Supplier Meet’ at The NeST Group, Kochi, who’s flagship company, SFO Technologies is India’s number 1 ODM player.

I first heard of the NeST group when I was last in Kochi, covering the Photonics event organized by Cochin University of Science & Technology. Today, I had a full introduction! The NeST group started operations in 1991. Now, it is a $220 million dollar company, and well, India’s premier ODM player!

More later 😉

Xilinx intros Zynq-7000 family of extensible processing platform (EPP)

Xilinx's Zync-7000 series.

Xilinx's Zync-7000 series.

Xilinx Inc. has unveiled the Zynq-7000 family, the industry’s first Extensible Processing Platform (EPP). It is supported by an extensive ecosystem of tools and IP providers.

According to Tim Erjavec, senior director, platform soluutions and service marketing, the Zynq-7000 family tightly integrates a complete ARM Cortex-A9 MPCore processor-based system with 28nm, low-power programmable logic for system architects and embedded software developers to extend, customize, optimize, and differentiate their systems.

Back in April 2010, Xilinx had announced a new class of devices featuring an extensible processing platform and a processor-centric solution. Now, in March 2011, the first Xilinx EPP family and brand has been announced.

Embedded designers are said to be asking for more. There will be a combined market of $12,74 billion by 2014, featuring automotive driver assistance, intelligent video surveillance, industrial control, telemetry and guidance, enterprise femtocell, broadcast cameras, multifunction printers, aerospace avionics, etc.

Zynq-7000 device portfolio includes the 7010, 7020, 7030 and 7040. These have faniliar design environments, familiar software programming model, familiar hardware design flow, besides flexible accelerators and IP such as common AXI-4 interface and a broad ecosystem featuring tools, OSs and IPs.

Zynq-7000 family highlights include a complete ARM processing system, featuring a dual ARM Cortex-A9 and ontegrated memory controllers and peripherals. A tightly integrated programmable logic extends the processing system, scalable density and performance and features over 3000 internal interconnects. There is also a flexible array of I/O, featuring a wide range of external multi standard I/O, high performance integrated serial tranceivers, and ADC inputs.

Built with state-of-the-art 7 series programmable logic featuring 430K to 3.5 million equivalent ASIC gates and 30K-235K logic cells. It also enables massive parallel processing with up to 760 DSP engines delivering over 910 GMACs.

The flexible internal I/O includes 54 processor I/Os, 350 multi-standard and high performance I/Os, flexible memory interfaces and high performance untegrated serial tranceivers.

A wide range of Zync-7000 applications are supported, such as driver assistance, factory automation, broadcast camera, smart surveillance systems, consumer equipment, AVB routers, switches and cameras, and military radios and medical imaging.

The Zync-7000 software development environment includes the ARM development environment. ARM ecosystem support and other, vast off-the-shelf software and libraries. The hardware design environment includes the Xilinx ISE Development Suite, plug and play IP portfolio, hardware abstraction layer, and drivers and APIs.

The Zync program status includes the early access program open with over 200 applicants, with the ISE 13.1 Development Suite and the emulation platform. Initial devices are said to be available by 2H 2011. Some of the publically announced Zynq early access customers include Agilent, iVeia, National Instruments, etc.

ST focuses on four key growth areas

Carlo Bozotti, president and CEO, STMicroelectronics.

Carlo Bozotti, president and CEO, STMicroelectronics.

According to Carlo Bozotti, president and CEO of STMicroelectronics, there are four key growth areas for the company:
* Smart meters and energy saving.
* Smart consumer devices.
* Trust and data security.
* Healthcare and well being.

Bozotti was speaking at the STMicroelectronics’ media roundtable held this evening at the Greater Noida, India office.

Year 2010 goes down in ST’s history as a year of records. Both ACCI and IMS surpassed the $1 billion mark in quarterly revenue. Year 2010 was also a year of recovery — with ST achieving $1,3 billion revenue and a net operational cashflow of $961 million. ST also improved its net financial position to $1.7 billion.

In 2011, ST promises to expand and continue to grow its customer base. This year, ST predicts that the global semicon industry will grow 5-8 percent.

ST forsees its second major block of growth in manufacturing. It has aggressive ramp-up planned in application areas, such as:
* MEMS.
* Smart power automotive field.
* New platforms and solutions in smartphones and tablets.

Even ST-Ericsson, which was in restructuring mode, is now secure. This year, said Bozotti, it will be a year of transition from old, legacy products to new.

The last priority is to achieve 3D SoCs, complex MCUs and twin MEMS. Bozotti noted that the company plans to combine accelerometer and gyroscope in a single application. It will also add innovative solutions to smartphones and tablets.

As for R&D, Bozotti claimed that the company will remain committed. “We strongly commit to R&D in both good and bad times,” he noted. Read more…

Top 10 Indian embedded companies!

February 7, 2011 4 comments

It has been over two years since I wrote the piece — Top 10 embedded companies in India! It has been the most read, and by far, the most commented.  Now, it is time to do a review, or, more suitably, a recap!

First, who are the top 10 (Indian) embedded systems and software companies in India? My list, in no particular order, would read something like this:

1. Ittiam
2. Sasken
3. CMC
4. C-DAC
5. L&T EmSyS
6. ProcSys
7. eInfochips
8. Mistral
9. iWave Systems/Global Edge
10. Vayavya Labs

There are several firms in Pune and Hyderabad, who probably deserve a name.  There may be some folks may not agree with this list, but I would go with these, for now. The next change could be two years down the road!

Some may even question the presence of CMC and C-DAC in this list. However, CMC has well over 30+ years of extensive experience in providing consulting, design and development services and testing services in real-time systems.

C-DAC has capabilities in high-performance computing as well as grid computing. It also has unit focusing on professional electronics, including embedded and VLSI products.

Ittiam and Sasken remain in the top 5 category. ProcSys is a new entrant, besides iWave, Global Edge and Vayavya Labs.

Now, may I know if you have any doubts, as well as moves, additions and/or changes (MAC)? 😉

Innovation enables every milestone at Ittiam!

February 3, 2011 4 comments

I first met Srini Rajam, chairman and CEO, Ittiam Systems, back in 2002-03 — a time when I’d just returned from Hong Kong and Singapore, having finished my first stint with Global Sources, and was still with Reed Elsevier (EDN Asia).

Today, I am proud to report a huge milestone in Ittiam’s journey — the company has completed a decade’s existence, and still remains India’s leading semiconductor company!

Technology for people
Today, Ittiam celebrated its journey of a decade and beyond! Speaking about technology for people, Rajam said, “Our technology has reached farther than we imagined!”

From the use of audio, video and communications in flight, train and car, it has moved on to personal communication, tablets and enterprise.As an example, it has gone beyond from beginner’s recording to home recording on to professional recording.

Ittiam IP is everywhere!

Ittiam IP is everywhere!

Do note that all of this hasn’t really been about fun and leisure only! For instance, Ittiam’s solutions have made their way into head mounted display for industrial applications, DVR unit for surveillance recording, IPTV encoding for broadcast head end, and WLAN SoC for automotive application.

Over the years, Ittiam has gained recognition as a key technology player. Today, it boasts of one of the widest range of technologies for embedded systems development (see figure).

Ittiam has gained a lot of headway in IP and system design, and chip design IP. Currently, it boasts of 45 patent filings and 28 patent grants.

IP business model
On the IP side of things, Ittiam has emerged as the model IP pioneer for India! Ittiam pioneered the IP licensing model from India. Ittiam retains the IP rights and shares the market risk with customers. Rajam added: “Royalty is like pricing a cricket bat on runs scored. The star players drive your success!”

He added that Ittiam had managed to touch the ‘sweet spot’ in terms of IP royalty in the range of 30-40 percent. There has been a steady growth in Ittiam’s royalty share of revenue, and is forecast at 25 percent as of 2010-11 estimates. Sustained growth in design wins has led to a situation from the year ending March 2004 revenue $4.8 million or Rs. 22 crores to year ending March 2010 with a revenue of $11.5M or Rs. 52 crores. From 2004-10, it witnessed six years of 15.7 percent CAGR.

From starting its India headquarter in Jan. 2001 and the US subsidiary in Feb. 2001, Ittiam has since gone on to open a France (Europe) subsidiary in Jun. 2007, and a Japanese branch office in June 2009, righ up to Singapore — where it set up the Asia subsidiary in Aug. 2010.

The next convergence!
Ittiam has set its sight on the new home for the best of multimedia and communication. The smartphone is now the next PC for convergence. Around 6 million mobile phones and tablets are likely to be shipped in 2010-11 with Ittiam’s HD video.These would be 720p HD video record and playback devices on SoC devices rated only for SD resolution.

Ittiam says that it has a lot to offer for smartphones and tablets in the coming year. The future is said to be powered by twin engines for industrial electronics and mobile communications. Industrial electronics should see complete applications and systems, while smartphones and tablets will likely witness a 3X growth over the next three years of OEM units with Ittiam IP.

All the best wishes to Ittiam in the new year, and the years ahead!

What's happening with Karnataka semicon policy?

January 31, 2011 2 comments

What’s happening with the Indian semiconductor industry? Rather, what’s happening with the Karnataka semicon policy? I was rather surprised to receive an invite to an event held last Friday at Bangalore’s The Lalit Ashok Hotel.

First, I did not make it to the event! However, one finds that the India Semiconductor Association (ISA) has organized an event, along with the Government of Karnataka, and that too in early 2011!

Excuse me, what is the Government of Karnataka doing in 2011 with a policy, which it is itself responsible for placing late! Okay, even if it is doing something, or well, trying to do something, why not in 2010 itself, especially when the Karnataka semicon policy was announced!

Now, the focus of the policy is:
a) Retain its edge in design by attracting fresh investments and expansion by existing companies within the state.
b) Attract manufacturing related investments by focusing on three key activities.
I. Promote Karnataka as a semiconductor design hub.
II. Attract investments in high-tech semiconductor manufacturing.
III. Promote generation and use of green energy, specifically, solar energy.
IV. Focus on manpower development.

All of this is fine! It is very well known and quite clear to the Indian semiconductor industry as to what’s required to be done in Karnataka.

Unless, the government of Karnataka found out that there have been no takers for the state semicon policy so far!

It seems to be the latter case!